Tee for boost gauge

[Mean Green]

What size tee is need to connect the boost gauge tubing and rubber vaccuum hose at the back of the manifold?

[ptgtcb]

quote:Originally posted by Mean Green

What size tee is need to connect the boost gauge tubing and rubber vaccuum hose at the back of the manifold?

If your talking about the brake booster hose then use Napa P/N 715-1817 3/8x3/8 with a 1/4 branch and it is a metal tee. I found that a plastic tee will start to melt from the heat comming off the turbo.

[Mean Green]

quote:Originally posted by ptgtcb

If your talking about the brake booster hose then use Napa P/N 715-1817 3/8x3/8 with a 1/4 branch and it is a metal tee. I found that a plastic tee will start to melt from the heat comming off the turbo.

Thanks, that was a big help.