PT Cruiser Forum  
Advertisements
       

Go Back   PT Cruiser Forum > 2.4L Turbo Forums > Turbo Performance

PT Cruiser Forum

Advertisements
AGP Wastegate actuator

 
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 18 Nov 2004, 11:47 pm
CJJ CJJ is offline
Young Cruiser
 
Join Date: Aug 2003
Location: alex., va, USA.
Posts: 55
Send a message via AIM to CJJ
Default AGP Wastegate actuator

Has anyone gotten and installed the AGP wastegate actuator that TThrift is selling? I'm thinking that Stage II is never going to come out and I will probably get a Stage I and the AGP wastegate actuator. I would like to hear what those who have purchased one think about it. CJJ
Reply With Quote
  #2 (permalink)  
Old 19 Nov 2004, 01:07 am
Fresh Cruiser
 
Join Date: Sep 2004
Location: Raleigh, NC.
Posts: 33
Default

Just got mine and will be installing with a EBC next week hopefully after pillar pod and gauges.
Reply With Quote
  #3 (permalink)  
Old 19 Nov 2004, 07:59 am
Cool Cruiser
 
Join Date: May 2003
Location: Prineville, Oregon, USA.
Posts: 386
Default

Ditto, will be running by Thanksgiving for sure

Deen
__________________
GT, 5-Spd, K&N filter, Stage I, AGP 3147 Big Turbo, DTEC Fuel Kit, Tial WGA, Greddy Profec EBC, DCR 55mm TB, 05 Plastic Manifold, 180 Deg. Stat, CCA FMIC, AMX hard-pipes, Water-Injection, STS shifter, Needswings 3\" DP w/dump and Borla Cat-back, BG Drop Springs, Eibach Sway Bars, Panther alloys & Eagle F1 Max-Performance Tires. Best run to date...12.93 @113.45MPH.
77 Blown Vette-runs 10\'s @ 136 MPH.
Reply With Quote
  #4 (permalink)  
Old 19 Nov 2004, 09:48 am
Regular Cruiser
 
Join Date: Jan 2003
Location: Largo, Fl, USA.
Posts: 108
Send a message via AIM to dfunkdj
Default

Got mine monday and hope to get it on maybe this weekend. Can't wait to get it on and see the more pick-up

Don Funk
Tampabay Pt Cruisers
__________________
<font color=\"orange\"><b>2003 Dream Cruiser II
Stage 1, Greddy blow off valve, AGP WGA, Custom open dual exhaust, Denso plugs, Xtremeboost upcharge pipe, AMX intake pipe, Ramair hoods hood, Apc ground effects kit, lowerd 3\", Turbo xs MBC, auto meter double gauge pod, and 2 more gauge mountd on sterring wheel {oil psi and temp, boost, water temp}
apc 2nd gen tail lights, more to come soon
Tampabay Pt Cruisers</b></font id=\"orange\">
Reply With Quote
  #5 (permalink)  
Old 19 Nov 2004, 12:29 pm
2step's Avatar
Senior Cruiser
 
Join Date: Oct 2004
Location: New Braunfels, Texas.
Posts: 1,672
Default

Someone please post pictures and "how to" comments. How hard is the installation? How hard is it to get at the ajustment nut?
Reply With Quote
  #6 (permalink)  
Old 19 Nov 2004, 12:43 pm
Fresh Cruiser
 
Join Date: Jul 2004
Location: .
Posts: 35
Send a message via AIM to InfernoPT
Default

Quote:
quote:Originally posted by 2step

Someone please post pictures and "how to" comments. How hard is the installation? How hard is it to get at the ajustment nut?
Ditto. Please let me know how the added fun factor is. Is it worth buying with guages, controller etc. Thanks
__________________
Stage 1 Turbo Lite, 1MEANPT as a plate,K&N Drop-in (REMOVED) AiRAID added, White silencer removed, more mods to come
Reply With Quote
  #7 (permalink)  
Old 19 Nov 2004, 12:48 pm
2step's Avatar
Senior Cruiser
 
Join Date: Oct 2004
Location: New Braunfels, Texas.
Posts: 1,672
Default

The SRT4 people have had the AGP WGA for a while now. I looked on their forum and it seems that it was not plug and play for them. They had a hard time to figure out what vacuum lines to plug and/or tee into. I hope it goes quicker for us.[:I]
Reply With Quote
  #8 (permalink)  
Old 19 Nov 2004, 11:55 pm
Cool Cruiser
 
Join Date: Jun 2003
Location: W. Covina, CA, USA.
Posts: 345
Default

I have a how to on here regarding the WGA. It's the turbochargers.com WG but it should install the same as the AGP, do a search. As far as adjusting the AGP I couldn't tell you how since mine is non-adjustable. I do suggest having a boost gauge while adjusting the settings on the AGP.
__________________
R_K_GT

\'03 Electric Blue GT, silencers removed, K&N intake, Blanes Hood Struts, Emblems removed from rear hatch, Stage 1, Mopar BOV, Eibach springs, 18x8 Mille Miglia EV-R on 225/40/18 BFG g-Force T/A KDW 2, Eibach sway kit F&R, BTG Strut Bar, Chrome fuel door, custom 3\" cat-back exhaust with Magnaflow High-flow muffler, Blitz Dual Turbo Timer, Autometer Triple gauge pod, Autometer Ultra-lite with boost/vac, oil press and water temp gauges, Turbochargers.com wastegate, turboxs DSBC, Adams UCP, Dynoworks motor mounts with more to come.....
Reply With Quote
  #9 (permalink)  
Old 20 Nov 2004, 03:59 am
Cool Cruiser
 
Join Date: Jan 2003
Location: Battle Creek, Mi, USA.
Posts: 228
Default

Gang,recived mine last thurs.,install went smooth
fun factor has gone way up!!. Adjustment takes a little
time, but once you get the steady 13lbs. that the instructions
call for then it is what ever you can live with,for me it
is 17lbs. If anyone wants more info. on how I did mine,
you can call me at 269-967-0646 I talk faster than I type.

Keith
__________________
culprat@sbcglobal.net
Reply With Quote
  #10 (permalink)  
Old 20 Nov 2004, 04:21 am
Regular Cruiser
 
Join Date: Apr 2004
Location: Albuqueruqe, NM, USA.
Posts: 194
Send a message via AIM to hoopdiewagon
Default

got ours yesterday. who knows when we will install it though.[:I]
__________________
<font color=\"purple\">214whp/246wtq</font id=\"purple\">
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
AGP wastegate w/o boost control strangelove Turbo Performance 13 13 Mar 2007 01:22 pm
AGP Wastegate strangelove Turbo Performance 8 21 Oct 2006 08:01 am
TThrift--billet wastegate actuator CJJ Turbo Performance 8 15 Sep 2004 07:47 am
Wastegate Info Needed GTPT Turbo Performance 10 05 Dec 2003 12:16 am
Wastegate Actuator And No Need for Boost Controlle FRM3 General Turbo Discussions 11 01 Dec 2003 10:51 pm


All times are GMT -5. The time now is 12:35 am.




Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
LinkBacks Enabled by vBSEO 3.6.0 PL2 © 2011, Crawlability, Inc.
vB.Sponsors