PT Cruiser Forum Car Videos
Car Rims      

Go Back   PT Cruiser Forum > 2.4L Turbo Forums > Turbo Wheels/Suspension/Handling
Reload this Page rear Sway Bar 2006 GT
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read
Site Home Forum Home Photo Gallery PT Events PT Videos Car Videos  

PT Cruiser Forum

rear Sway Bar 2006 GT

 
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 29 Sep 2006, 05:14 am
SteelBlueGT SteelBlueGT is offline
Senior Cruiser
  
Join Date: Oct 2002
Location: Riverside, Ca, USA.
Posts: 1,372
Default rear Sway Bar 2006 GT
Does anyone know if the all new for 06 GT's still have all the mounting holes for the way bar and will my 03 install kit work on an 06??
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #2 (permalink)  
Old 29 Sep 2006, 09:00 am
quicksilverdon quicksilverdon is offline
Veteran Cruiser
  
Join Date: Nov 2003
Location: Phillipsburg, NJ, USA.
Posts: 4,351
Default
Grab a sheet of cardbord, put it on the ground, lay down & look - then you'll know.
What I can tell you is that sometime in '05 they stopped putting in the captive nuts in the recess, and the Mopar mounting kit I got was short those 2 nuts - got them at home Depot - I took a bolt with me - I'll save you a lot of time - they are METRIC.
I also came up with a trick - stuff a piece of paper towel in the recess to hold the nut up to the hole so you can start the bolt. Then, take a BFS (Big, F...ing Screwdriver) and wedge it agaist a flat on the nut while you tighten the bolt - you can't get a wrench in there. AND those bolts have to be TIGHT.
__________________
\'05 Limited Turbo Lite, (Silver, of course)4-wheel ABS, Sunroof, Spoiler, E&G Classic grill, K&N FIPK, BTG duals, rear lowered 1.5\", LED washer lights, $20 catch can, Aoogah horn, Weatherflectors, Sunroof Deflector, Fuzzy Dice, rear logo flames, rear pinstripe graphic, Gen3 Taillights, rear sway bar, hood struts, Strut bar.
Traded in \'02 Silver Touring Edition w/87,000 miles
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #3 (permalink)  
Old 29 Sep 2006, 04:02 pm
SteelBlueGT SteelBlueGT is offline
Senior Cruiser
  
Join Date: Oct 2002
Location: Riverside, Ca, USA.
Posts: 1,372
Default
I will look again but I casually looked when I bought the car and I could not find the mounting holes. But if I remember they were kinda out of the way and I only found them on my 03 when I had the bar and linkage kit in hand and they guided me to the mounting locations.
__________________
06 GT Auto, Cool Vanila Exterior, Presto Change O 3bl, Cargo Mat and Net, Billet Oil Cap, Yoko Avid 4Vs Tires, 03 GT Wheels, 4 Chrome Door Handle Screw Covers, MOPAR Mud Flaps, H&R Rear Sway Bar, Freedom Strut Tower Bar, Rear Door Sill Covers.
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #4 (permalink)  
Old 10 Oct 2006, 04:18 pm
Tom and Marj Green Tom and Marj Green is offline
Fresh Cruiser
  
Join Date: Nov 2005
Location: Los Altos Hills, CA.
Posts: 21
Default
Just had Eibach rear sway bar and Chyrsler sway bar mounting kit installed on my 2006 GT. no problem; very simple bolt on. Turbo Tommy
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #5 (permalink)  
Old 27 Nov 2006, 03:43 pm
SteelBlueGT SteelBlueGT is offline
Senior Cruiser
  
Join Date: Oct 2002
Location: Riverside, Ca, USA.
Posts: 1,372
Default
Thank You I have ordered my H&R adjustable bar and Eibach intall kit!
__________________
06 GT Auto, Cool Vanila Exterior, Presto Change O 3bl, Cargo Mat and Net, Billet Oil Cap, Yoko Avid 4Vs Tires, 03 GT Wheels, 4 Chrome Door Handle Screw Covers, MOPAR Mud Flaps, H&R Rear Sway Bar, Freedom Strut Tower Bar, Rear Door Sill Covers.
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #6 (permalink)  
Old 28 Nov 2006, 10:05 am
quicksilverdon quicksilverdon is offline
Veteran Cruiser
  
Join Date: Nov 2003
Location: Phillipsburg, NJ, USA.
Posts: 4,351
Default
Quote:
quote:Originally posted by SteelBlueGT

Thank You I have ordered my H&R adjustable bar and Eibach intall kit!
Hope you have better luck than most with the Eibach mounting kit - many have had problems - the Mopar mounting kit is actually better!
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #7 (permalink)  
Old 06 Jan 2007, 04:56 pm
SteelBlueGT SteelBlueGT is offline
Senior Cruiser
  
Join Date: Oct 2002
Location: Riverside, Ca, USA.
Posts: 1,372
Default
It may be better but I have got a lot of extra parts now from Eibach and they did make good on my last ones that were defective from my 2003. Seems that the parts that went bad were supose to be solid but the outside vendor made them hallow and mine rusted / corroded out and broke. New ones are solid. Now I just need to figure out how to get rid of the squeek in my 06 install bushings!!
__________________
06 GT Auto, Cool Vanila Exterior, Presto Change O 3bl, Cargo Mat and Net, Billet Oil Cap, Yoko Avid 4Vs Tires, 03 GT Wheels, 4 Chrome Door Handle Screw Covers, MOPAR Mud Flaps, H&R Rear Sway Bar, Freedom Strut Tower Bar, Rear Door Sill Covers.
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #8 (permalink)  
Old 08 Jan 2007, 12:39 pm
hharper1321's Avatar
hharper1321 hharper1321 is offline
Young Cruiser
  
Join Date: Apr 2004
Location: Baltimore, MD, USA.
Posts: 67
Default
Quote:
quote:Originally posted by quicksilverdon

Grab a sheet of cardbord, put it on the ground, lay down & look - then you'll know.
What I can tell you is that sometime in '05 they stopped putting in the captive nuts in the recess, and the Mopar mounting kit I got was short those 2 nuts - got them at home Depot - I took a bolt with me - I'll save you a lot of time - they are METRIC.
I also came up with a trick - stuff a piece of paper towel in the recess to hold the nut up to the hole so you can start the bolt. Then, take a BFS (Big, F...ing Screwdriver) and wedge it agaist a flat on the nut while you tighten the bolt - you can't get a wrench in there. AND those bolts have to be TIGHT.
Good tips, but for a bit more info, they didn't include any captive nuts on my 04, either...
__________________
2004 PTGT - Stage 1 and a bunch of bolt-ons, even more bolt-ons waiting in the garage!

How come "The People" in the First Amendment means The People; "the People" in the Fourth Amendment means The People; but "the People" in the Second Amendment (ratified in 1791) means the National Guard (created by an Act of Congress in 1903)?
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Reply

« Previous Thread | Next Thread »


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Rear sway bar kit turbomangt Turbo Wheels/Suspension/Handling 10 05 Jul 2005 12:40 pm
Installed Eibach Anti Roll Kit(Front & Rear Sway) Gear_Head Turbo Wheels/Suspension/Handling 27 28 May 2004 02:05 am
Replace/install both sway bars or just rear? im4gzs Turbo Wheels/Suspension/Handling 11 23 Feb 2004 09:11 am
Suspension Techniques Sway Bars For the GT Turbo Gear_Head Turbo Wheels/Suspension/Handling 2 12 Sep 2003 02:51 am
Rear Sway Install Problem divots Turbo Wheels/Suspension/Handling 6 06 Jul 2003 01:57 pm


All times are GMT -5. The time now is 03:04 pm.




Contact Us - PTCruiserLinks - Site Map - Top

Powered by vBulletin® Version 3.6.7
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
LinkBacks Enabled by vBSEO 3.0.0 © 2007, Crawlability, Inc.
vB.Sponsors

  Internet Advertising | Recreation 2007 | Myspace Proxy | Adverse Credit Remortgage | 0 Credit Cards