WHERE DID YOU GET YOUR SWAY BARS FROM

[RODRUN]

Hey you all, let me know where you ordered your sway bars for your GT'z from.

[rice_killing_GT]

Got my Eibachs here: http://www.genxmuscle.com/store/2860-320

Ordered them on a Friday, got them in the following Thurs, so less than a week. Plus it's free shipping for items over $150.00

[RODRUN]

THANKS RKG

[PTGT Redman]

quote:Originally posted by rice_killing_GT

Got my Eibachs here: http://www.genxmuscle.com/store/2860-320

Ordered them on a Friday, got them in the following Thurs, so less than a week. Plus it's free shipping for items over $150.00

Me too. Good price.

[rice_killing_GT]

RR

Don't forget you need to also pick up these parts at your dealer to install the rear.

Part list provided by GearHead

Parts List: Rear Sway Bar Parts needed for Aftermarket Rear Sway Bar (Yr.2003)

Part# Description QTY(ea.)

04656927AA---------RETAINER Sway Bar------------------------QTY-2
04656940AA---------RETAINER Sway Bar------------------------QTY-2
06504010-----------SCREW & WASHER Hex Head, M10x1.50x35-----QTY-2
04656934AB---------LINK Sway Eliminator---------------------QTY-2
06506496AA---------BOLT Lower Link to Sway Bar--------------QTY-2
06506509AA---------SCREW,Hex Head---------------------------QTY-2
06502696-----------NUT,Hex Flange Lock M10x1.5--------------QTY-4

[PT2NV]

Just received the Eibach anti-roll kit this week (www.truckperformance.com) Instructions stated:
"To install this kit on cars without an OE rear bar, order hardware kit 2860.320HKR"
Found a place to order one of these kits ($80). . . they said it would take about 2 weeks. I'll let you know if it completely eliminates buying factory parts (as listed above), or what additional parts will still be needed.

Also nice to see aftermarket red finish vs the factory rust finish (factory rust in the case of the front bar, and factory stealth invisible paint as used on the rear).

[sabishop]

I bought the Mopar Performace sway bar kit and the install package from my local dealer. It only cost me $435.00(CDN) which is about $300.00 (USD)for the whole package delivered right here in the middle of nowhere [)] (Thunder Bay, Ontario). The front bar looks to be a little thinner than the stock one so I'll probably just have the rear installed.

Considering the cost of trying to get aftermarket bars into Canada I think the cost of this setup isn't too bad [B)].

When the GT goes for it's 14,000 km (two more tanks of gas) check up the new bars are going on. I'll leave an opinion piece when the jobs done.[8)]

[madcruiser]

quote:Originally posted by sabishop

I bought the Mopar Performace sway bar kit and the install package from my local dealer. It only cost me $435.00(CDN) which is about $300.00 (USD)for the whole package delivered right here in the middle of nowhere [)] (Thunder Bay, Ontario). The front bar looks to be a little thinner than the stock one so I'll probably just have the rear installed.

Considering the cost of trying to get aftermarket bars into Canada I think the cost of this setup isn't too bad [B)].

When the GT goes for it's 14,000 km (two more tanks of gas) check up the new bars are going on. I'll leave an opinion piece when the jobs done.[8)]

sabishop

Which Mopar Swaybar kit did you order? It's my understanding that Mopar does not sell a rear sway bar set up for the Turbo? Is it the sway bar kit for the non turbo? [:I]

Let me know how it goes and if you have any problems, if all goes well I would interested in doing same, thanx []

[sabishop]

It's the sway bar kit from the Chrysler Performance Parts Catalogue. It's last years catalogue but the numbers are just fine. The dealer says that the new catalogue isn't out yet and I guess that by the time the 2003 catalogue comes out we'll all be looking for the 2004 one, but that's the way she goes, eh?

[PT2NV]

quote:Originally posted by PT2NV

Just received the Eibach anti-roll kit this week (www.truckperformance.com) Instructions stated:
"To install this kit on cars without an OE rear bar, order hardware kit 2860.320HKR"
Found a place to order one of these kits ($80). . . they said it would take about 2 weeks.

Update on Eibach rear sway bar installation kit . . .

"This item is still on order from the manufacturer. On 12/23/2003 our follow up with Eibach determined that they will ship the week of 01/19/2004"