Brake kits for the Pt Gt from Moparsupercenter.com

[JEFF@RHJEEP]

The Mopar Supercenter STAGE1 street brake kit. Consisting of a pair of Performance rotors, and Performance Carbon Fiber pads. This is an affordable street performance brake upgrade that is comparible to OEM brake equipment prices. With the added benefits of enhanced cooling, lower rotor temperatures, reduced brake fade, shorter stopping distances, enhanced wet weather braking, and minimal brake dusting, your SRT4 will show off the racing brake image. Available in 3 different Cadium Platings, Silver, Gold, and Black. With additional options to include slotted, drilled, Dacromet rust inhibitor plating, and Cryogenic Treatment for improved performance, we have your braking needs covered.
(Cad plating is a rust inhibitor only, and is in no way a gurantee that a brake disc will not rust.)
The Performance brake rotors are available either cross-drilled or gas slotted, except where indicated.
Notice:
Addition charges may apply depending on options choosen. We will contact you on available options when your order is placed.
Image is a representation of available products, may not be the actual product for your application.

MPSC price $229.99(front) 199.99(rear) plus color options and shipping.

The Stage 2 Lightweight front rotors are now available.

MPSC Stage 2 Street Rotors - List $595.00 - Introductory $475.00/pair

Standard 2 piece disc assembly featuring Anodized Light-weight rotor hats, and Black Cadium custom machined rotor disc.
Color options for Hats
Black
Red
Blue
Silver

Rotor Surface Options
Crossdrilled
Super Sport Drilled (More smaller holes, no less swept area, More for show)
Race Slotted

MPSC Stage 2 Race Rotors - List $895.00 - Introductory $675.00/pair

Standard 2 piece disc assembly featuring Anodized Light-weight rotor hats, and Black Cadium custom machined rotor disc. These feature a patent pending special machined cooling ducts for improved brake cooling.

Color options for Hats
Black
Gold

Rotor Surface Options
Crossdrilled
Super Sport Drilled (More smaller holes, no less swept area, More for show)
Race Slotted

All discs are hand assembled and verify:
1- lateral runout ± 0.001"
2-radial runout ± 0.001"
3-surface finish 60 ~ 80 RMS
4-balance 0.7 kg/mm
5- ready to install

Replacement rotor discs will be made available also. It is recommended to thoroughly inspect the rotor hats for cracks during the rotor disc replacement. The rotor hats typicaly need to be replaced after the second rotor disc needs replacing. If any damage is noticed during rotor disc replacement, replace hat.

These are direct factory replacements, they are not oversized. Rear rotors are still under development. We will add these to our website once the finish product is available.

Jeff