PT Cruiser Forum

PT Cruiser Forum (http://www.ptcruiserlinks.com/forum/)
-   Wheels, Tires, Suspension (http://www.ptcruiserlinks.com/forum/wheels-tires-suspension/)
-   -   Maxspeed Springs- Input needed ASAP (http://www.ptcruiserlinks.com/forum/wheels-tires-suspension/15525-maxspeed-springs-input-needed-asap.html)

JCsGTPT 08 Aug 2007 12:36 pm

Maxspeed Springs- Input needed ASAP
 
Anybody currently running, or had in the past, maxspeed lowering springs?

If so, do you / did you like?

Lowering quoted as 1.4 in the front and 1.5 in the rear. Is this the results you got after install? Seems this would minimize the rake and not go too low which I would be interested in.

Did I read somewhere that the Mopar springs are manufactured by Maxspeed?

CREWZIN 08 Aug 2007 01:27 pm

Re: Maxspeed Springs- Input needed ASAP
 
Can't reply as to MaxSpeed springs as I have a Eibach's but almost all lowering kits drop the rear lower than front to get rid of most of the rake.

R3dWhitNCrz 09 Aug 2007 12:16 pm

Re: Maxspeed Springs- Input needed ASAP
 
Make sure you read through the suspension forums for the Turbo too, alot of information about springs in general. Be sure to upgrade shocks and anything else to make it work right the first time. I am working on my 5th change.:eek: I started with Gold line and stock shocks/struts. Then switched to Sachs struts. Then changed to eibach and sachs, only to replace sachs with Tokikos, now I'm trying to figure out the next/best move from there. :confused: Do it right the first time, you may have to spend more money but you won't be like me and replacing parts all the time. Good luck.

NMdesertracer 27 Aug 2007 05:10 pm

Re: Maxspeed Springs- Input needed ASAP
 
Quote:

Originally Posted by JCsGTPT (Post 217296)
Anybody currently running, or had in the past, maxspeed lowering springs?

If so, do you / did you like?

Lowering quoted as 1.4 in the front and 1.5 in the rear. Is this the results you got after install? Seems this would minimize the rake and not go too low which I would be interested in.

Did I read somewhere that the Mopar springs are manufactured by Maxspeed?

I bought those for my car. I only put the back springs in for now. Becuase im running 18" rims. Car sits level.

Taggert_LOA 28 Aug 2007 11:25 am

Re: Maxspeed Springs- Input needed ASAP
 
I'm running just the rears with the stock shocks and it works fine, it levels the car out perfectly.


All times are GMT -5. The time now is 10:25 pm.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
LinkBacks Enabled by vBSEO 3.6.0 PL2 © 2011, Crawlability, Inc.
vB.Sponsors


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243