Rick, did replacing the oil pressure sensor on your PT fix the 'oil light not coming on when engine is off' problem? Or was it a wiring problem? I know this question is going back a while. Have the same problem on ours but the wiring is a bit rigid from the heat from the exhaust system.

Accessory belts of course, camshaft seals, center engine mount, tensioner pulley or complete tensioner assembly (pulley is actually enough), accessory belt tensioner pulley (although changing that...

I started this thread in an area that will be seen by members as well none members that are generally restricted to viewing some area's of forums. My wife who is in the Health Care Profession has...

Replace with an LED Bulb, so you never have to change it again. And, will be brighter. All my interior bulbs are now LEDs! ;) Any automotive parts store can help you match up the correct one. ...

Napa legend premium part# 8447 Cranking amps @ 32°f 800 Cold cranking amps@ 0°f 650 100 minute reserve I think stock is around 635ca 520cca and 60minute reserve... The counter guy should be...

One more test to perform is with a multimeter. To check for a possible bad alternator diode, switch your voltmeter to a low setting on the AC (alternating current) voltage scale. * With the engine...

To test the diode on the alternator, use a multi-meter and test for AC (not DC) on the battery terminals while the battery is connected to the car and the engine is running. Your reading should be 0....

lol...nice :)

This topic has interested me for some time. When I first got my cruiser, I noted that there was a different part number for GTs than NA cars and I didn't understand what the difference was. I even...

Could this be the issue? http://www.ptcruiserlinks.com/forum/turbo-wheels-suspension-handling/63634-gt-steering-knuckle-differences.html#post654581

On my 2001 PT Limited, I did the bumper in black to match my black spoiler. It really made the car look more butch. I actually rolled on the base coat with a foam roller and then applied high gloss...

This fix for the black bumpers on the early model PT's is brought to you by Chris15. First off, thank you! Now, onto your problem.. Yes, the 'tape marks' are quite unsightly, and both you and I...

Yes. Here's some stuff I've picked up at salvage yards for my PT's: 1. Spare tire with aluminum rim. 2. OEM cargo net that came in the cubby in 2001 PT's 3. An extra engine cover with studs...

....to the CLOCK??? Better have been ATC3+! :D

Here is what is contained in the referenced TSB: https://i.imgur.com/uroDidC.jpg

Had to get towed this morning. First, car would start and and quickly stall. This happen a few tries then no crank no start. Towed to mechanic long story short they reset the computers by...